Alpenf�hn 84000000179 Gletscherwasser 360 Processor 84000000179

Alpenföhn is presenting with the “Gletscherwasser” a premium AIO- water cooling solution with addressable RGB lighting. This solution has been done in cooperation with the overclocking legend Roman „der8auer“ Hartung. Within the set, there are Wing Boost 3 ARGB fans as well as Thermal Grizzly Hydronaut heat transfer compound, offering a nice round package with superior thermal performance and silent operation. The exchangeable logo plate also enables individual designs. Gletscherwasser offers full compatibility with Ryzen 5000 / Zen 3. The final assembly of the water cooling solution is done in Germany!

Pump

The diamond ground Copper base plate of the pump unit possesses large area micro-channels to dissipate the waste heat of the CPU into the cooling circuit quickly and efficiently. Pump speeds between 1200 U/min and 2600U/min offer an extremely balanced performance spectrum for every aspect of your requirements. Decide yourself whether overclocking or virtual silence is on your mind. An intelligent cooling routing in a two-chamber design within the pump housing offers noise reduction whilst increasing performance and longevity in comparison to conventional designs. The finish of the injection moulded pump housing and cover is enriched by piano lacquer.

Radiator

Gletscherwasser contains an Aluminium high performance radiator. For enhanced safety within your system, the radiator uses a “leak-free” design. In the very unlikely case of a leak within the cooling system, the pressure inside the system is regulated to avoid any loss of coolant. Therefore your hardware is always SAFE.

Heat Transfer Compound

The included Thermal Grizzly Hydronaut paste with its excellent thermal conductivity can be used for normal as well as overclocking applications. It was developed specifically for large area applications as for example found in water cooling systems. Main advantages: No dry-out, silicone free and electrically insulating.

Wing Boost 3 ARGB

With its 16,8 million colours the Wing Boost 3 ARGB offers numerous possibilities to put your case into the right light. The addressable RGB LED lights are integrated into the fan housing and vaguely show the impeller as well as shine stylishly to the outside.

Air flow optimized fan blades

By means of a new blade angle the rotor has been optimized to lower speed in order to achieve in comparison with other fans a significantly higher volume flow, total pressure and exit speed at the same speed. Thanks to the Wing Boost 3 technology, air turbulence at the impeller is greatly reduced to ensure even quieter operation at full fan speed.

IC motor control

High-quality IC motor control minimizes electrical noise, especially in the low speed range, to a minimum.

Fluid Dynamic Bearing

By using the Fluid Dynamic bearing, we can realize a low-vibration and whisper-quiet operation of the fan.

PWM speed control

The new Wing Boost 3 supports speed control using the motherboard's PWM signal.

De-vibration Pads

The de-vibration rubbers reduce the often annoying noises, which are transmitted by the vibrations of the fan to the case, by their excellent anti-vibration characteristics to a minimum.

Do it yourself!

Realize your dream project with the included logo plates for the pump unit. All plates can be orientated freely on a 90° pattern. Do you require more creativity? The clear logo plate can be customized to your choice: Ideal for own logos, clan motives etc. Simply twist the bayonet cap on the pump head, swap the logo plate and close the cap. That’s all? Yes – Wow, that was easy.

Design



Fan connector



3-pin + 4-pin


Fan controller



Yes


Illumination colour



Blue, Green, Red


Illumination LED



Yes


Number of fans



3 fan(s)


Product colour



Black


Radiator material



Aluminium


Water block material



Copper


Logistics data



Harmonized System (HS) code



84733080


Other features



Noise level



17.8 dB


Number of fans supported



3


Thermal grease



Yes


Package dimensions



Gross Weight (Package, kg)



0.26 kg


Performance



Airflow



92.6 m³/hr


Fan bearing technology



Fluid Dynamic Bearing (FDB)


Fan noise level (max)



23.5 dB


Fan speed (max)



1600 RPM


Fan speed (min)



500 RPM


Fan static pressure



2.19 mmH2O


Pulse-width modulation (PWM) support



Yes


Pump connector



3-pin


Pump motor speed (max)



2550 RPM


Pump motor speed (min)



1200 RPM


Suitable location



Processor


Supported processor sockets



LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1366 (Socket B), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket AM4, Socket FM1, Socket TR4, Socket sTRX4


Type



All-in-one liquid cooler


Power



Fan current



0.57 A


Fan voltage



12 V


Pump current



25 mA


Pump power consumption



2.4 Watt


Pump voltage



12 V


Product dimensions



Net Weight (Product, kg)



0.2 kg


Product Depth



2.6 cm


Product Height



8.6 cm


Product Width



7.5 cm


Vendor information



Brand Name


Alpenföhn


Warranty



1 Year(s)


Weight & dimensions



Fan dimensions (W x D x H)



120 x 120 x 25 mm


Radiator depth



2.7 cm


Radiator height



12 cm


Radiator width



40.2 cm


Tube length



4.65 cm