Brodit
Brodit 512919 Active holder w. cig-plug 512919
(No reviews yet)
Write a Review
- UPC:
- 7320285129191
- MPN:
- 512919
- Condition:
- New
- Availability:
- Available to Order: 3 - 4 weeks leadtime
Description
With tilt swivel. 2A charging. With USB A outlet in the cig-plug, 1A charging. 12/24V.
Keep your device's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With cig-plug cable, 2A charging via the Micro-USB connector. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the tablet in place in the holder so it connects to the charging, and to take it out of the holder when leaving the vehicle.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
Design
Certification
E, CE, FCC
Compatibility
Samsung Galaxy Tab A 10.1 (2016)
Mobile device type
Tablet/UMPC
Product colour
Black
Proper use
Car
RoHS compliance
Yes
Type
Active holder
Multimedia
Built-in speaker(s)
No
Package dimensions
Gross Weight (Package, kg)
0.2 kg
Power
Built-in charger
Yes
Charging voltage
4.75 - 5.25 V
DC voltage range
10-30 V
Power source type
Cigar lighter
Product dimensions
Net Weight (Product, kg)
0.1 kg
Product Depth
4.2 cm
Product Height
25 cm
Product Width
17.5 cm
Technical details
Sustainability certificates
RoHS
Vendor information
Brand Name
Brodit
Homepage
http://www.brodit.se/product.html?locale=se&id=512919
Warranty
1 Year(s)
View AllClose
Keep your device's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With cig-plug cable, 2A charging via the Micro-USB connector. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the tablet in place in the holder so it connects to the charging, and to take it out of the holder when leaving the vehicle.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
Design
Certification
E, CE, FCC
Compatibility
Samsung Galaxy Tab A 10.1 (2016)
Mobile device type
Tablet/UMPC
Product colour
Black
Proper use
Car
RoHS compliance
Yes
Type
Active holder
Multimedia
Built-in speaker(s)
No
Package dimensions
Gross Weight (Package, kg)
0.2 kg
Power
Built-in charger
Yes
Charging voltage
4.75 - 5.25 V
DC voltage range
10-30 V
Power source type
Cigar lighter
Product dimensions
Net Weight (Product, kg)
0.1 kg
Product Depth
4.2 cm
Product Height
25 cm
Product Width
17.5 cm
Technical details
Sustainability certificates
RoHS
Vendor information
Brand Name
Brodit
Homepage
http://www.brodit.se/product.html?locale=se&id=512919
Warranty
1 Year(s)