Brodit 521684 Active holder w. cig-plug 521684

With USB-cable with cig-plug adapter. Apple approved charging cable. With tilt swivel

Use an active holder for your iPad while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient. The holder is equipped with an apple approved USB-cable with cig-plug adapter. You can choose to connect the cig-plug to the car's 12 Volt socket, or to remove the cig-plug adapter and connect the USB cable to the car's (or stereo's) USB connector.

Important note! In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car�s dashboard if they block the view or block key controls. ProClip (Brodit�s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car�s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle�s dashboard is always done on the customer�s own responsibility. Brodit recommends to use tablets on the car�s headrest, installed onto a Brodit headrest mount.

INSTALLATION INSTRUCTIONS:1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

3. To place the device in the holder: Slide it straight sideways into the holder so it connects to the connector.
To remove the device from the holder: Slide it straight sideways out from the holder.

4. The holder is in place.

Design



Compatibility



Apple iPad Air 2


Mobile device type



Tablet/UMPC


Product colour



Black


Proper use



Universal


Type



Active holder


Multimedia



Built-in speaker(s)



No


Package dimensions



Gross Weight (Package, kg)



0.45 kg


Power



Power source type



Cigar lighter


Product dimensions



Net Weight (Product, kg)



0.35 kg


Vendor information



Brand Name


Brodit


Homepage



http://www.brodit.se/product.html?locale=se&id=521684


Warranty



1 Year(s)