Brodit
Brodit 527942 Active holder for 527942
- UPC:
- 0000000000000
- MPN:
- 527942
- Condition:
- New
- Availability:
- Available to Order: 3 - 4 weeks leadtime
Description
This holder is crash tested and approved for use with device without skin/case on Brodit's headrest mount.
Measure your device/skin/case and compare with specifications. Fits for devices with/without skin/case with height 180-230 mm, max thickness 25 mm. For use with devices with Micro USB connector.
For connection inside the dashboard, no cables hanging over the interior. With fly lead, you manually connect the charging cable to the device when needed (not automatic charging when placed in holder). With tilt swivel. Tilts 20°, swivels 360°. Padded cushions for protection against sliding/scratching. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Connect the power cable with a 2A fuse. Professional installation recommended. Made of high grade black ABS/Acetal plastic. Made in Sweden
Dimensions holder : 164 x 188 x 69 mm (W x H x D mm)
Weight: 335 g
Cable length: Total length: 400 cm (Connector to box: 145 cm, Box 8 cm, Box to open end: 243 cm.)
Crash tested:This adjustable holder is crash tested according to standard for car seats (ECE R17). The crash test applies for a tablet that weighs 490 g. The tests have been performed on one seat with invisible headrest pins (type Volvo etc.) and one seat with visible headrest pins (type Ford etc.) in the forward and rearward directions. The adjustable holder keeps the tablet in place during all executed tests.
Important information:Tablets should not be installed onto a car’s dashboard. They may block the view or key controls and the ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets in a holder on the car’s headrest, installed onto a Brodit headrest mount.
Design
Device mount type
Clamp mount
Material
Acetal, Acrylonitrile butadiene styrene (ABS), Plastic
Mobile device type
Tablet/UMPC
Orientation
Horizontal/Vertical
Product colour
Black
Proper use
Car
Type
Active holder
Multimedia
Built-in speaker(s)
No
Package dimensions
Depth (package,cm)
8.3 cm
Gross Weight (Package, kg)
0.3 kg
Height (package,cm)
20.2 cm
Width (package,cm)
18 cm
Power
Power source type
USB
Product dimensions
Net Weight (Product, kg)
0.21 kg
Product Depth
6.8 cm
Product Height
18.7 cm
Product Width
16.5 cm
Vendor information
Brand Name
Brodit
Homepage
http://www.brodit.se/product.html?locale=se&id=527942
Warranty
1 Year(s)
View AllClose
Measure your device/skin/case and compare with specifications. Fits for devices with/without skin/case with height 180-230 mm, max thickness 25 mm. For use with devices with Micro USB connector.
For connection inside the dashboard, no cables hanging over the interior. With fly lead, you manually connect the charging cable to the device when needed (not automatic charging when placed in holder). With tilt swivel. Tilts 20°, swivels 360°. Padded cushions for protection against sliding/scratching. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Connect the power cable with a 2A fuse. Professional installation recommended. Made of high grade black ABS/Acetal plastic. Made in Sweden
Dimensions holder : 164 x 188 x 69 mm (W x H x D mm)
Weight: 335 g
Cable length: Total length: 400 cm (Connector to box: 145 cm, Box 8 cm, Box to open end: 243 cm.)
Crash tested:This adjustable holder is crash tested according to standard for car seats (ECE R17). The crash test applies for a tablet that weighs 490 g. The tests have been performed on one seat with invisible headrest pins (type Volvo etc.) and one seat with visible headrest pins (type Ford etc.) in the forward and rearward directions. The adjustable holder keeps the tablet in place during all executed tests.
Important information:Tablets should not be installed onto a car’s dashboard. They may block the view or key controls and the ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets in a holder on the car’s headrest, installed onto a Brodit headrest mount.
Design
Device mount type
Clamp mount
Material
Acetal, Acrylonitrile butadiene styrene (ABS), Plastic
Mobile device type
Tablet/UMPC
Orientation
Horizontal/Vertical
Product colour
Black
Proper use
Car
Type
Active holder
Multimedia
Built-in speaker(s)
No
Package dimensions
Depth (package,cm)
8.3 cm
Gross Weight (Package, kg)
0.3 kg
Height (package,cm)
20.2 cm
Width (package,cm)
18 cm
Power
Power source type
USB
Product dimensions
Net Weight (Product, kg)
0.21 kg
Product Depth
6.8 cm
Product Height
18.7 cm
Product Width
16.5 cm
Vendor information
Brand Name
Brodit
Homepage
http://www.brodit.se/product.html?locale=se&id=527942
Warranty
1 Year(s)