connektgear 0.5m RJ45 CAT5e UTP Stranded Flush Moulded Network Cable - 24AWG - W 28-0005W

-

Specs




Features


Product colour

The colour e.g. red, blue, green, black, white.

White


Cable length

How long the cable is.

0.5 m


Cable standard

The category of the cable, which is determined by performance characteristics and test requirements.

Cat5e


Cable shielding

The protective layer for the cable, typically made of plastic.

U/UTP (UTP)


Connector 1

This is the first connector in the device.

RJ-45


Connector 2

This is the second connector in the device.

RJ-45


Connector 1 gender

The gender of the first connector of the product. Each half of a pair of mating connectors is assigned the designation male or female, the part bearing one or which fits into another being called male.

Male


Connector 2 gender

The gender of the second connector of the product. Each half of a pair of mating connectors is assigned the designation male or female, the indented one or the one fitting around the other being called female.

Male


Connector contacts plating

What the connector contacts are covered with (layer on top).

Gold


Connector shielding




Jacket material

Polyvinyl chloride (PVC)


Conductor type

Stranded


Cabling technology

Type of cable technology performance.
/100Base-T(X)


Ethernet interface type

Fast Ethernet


Networking standards

The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.

IEEE 802.3, IEEE 802.3u



Features


AWG wire size

24


Data transfer rate

Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.
0 Mbit/s


Frequency
0 MHz


Molded cable boot




Snagless cable boot




Plug and Play

Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.




Certificates


Compliance certificates

RoHS


Certification

REACH


Weight & dimensions


Weight

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

30 g


Packaging data


Package width

The distance from one side of the packaging to the other.
0 mm


Package height

The distance from the top to the bottom of the packaging.

220 mm


Package weight

Weight of the packaged product.

3.5 g


Package type

The type of product package e.g. box.

Bag