Hewlett Packard Enterprise
HPE MR416I-P GEN11 SPDM STORAGE RAID controller PCI 4.0 P47777-B21
- UPC:
- 0000000000000
- MPN:
- P47777-B21
- Condition:
- New
- Availability:
- Available with FREE Delivery (usually delivered within 5-7 working days)
Description
Do you need a versatile, simplified, and flexible choice for your data centers? HPE Compute MR Controllers are expansive and agile PCIe Gen4.0 (PCIe Gen5 for MR932i-p) storage controllers based on Broadcom MegaRAID technology that deliver quality, performance, and security for mission-critical applications. The HPE MR416i-o / HPE MR416i-p controllers are ideal for most data center environments where RAID is applicable offering reduced rebuild times, high bandwidth, and 240K RAID5 Random Write IOPS. The HPE MR416i-o / HPE MR416i-p controllers are ideal for many virtualized environments where HBA / pass-through mode is applicable offering high bandwidth and three million random write IOPS. HPE Compute MR Controllers offer solutions for multiple workflows across multiple applications to deliver customer satisfaction.
What is new supporting point:MR932i-p with PCIe Gen5 speeds (32 G NVMe and 24 G SAS) and does not support SATA SSDs nor SATA/SAS HDDs
Standard PCI HH/HL and OCP NIC 3.0 form factors.
DMTF Security Protection Data Model (SPDM) supports certificate-based authentication with HPE iLO 6.
Hardware Root of Trust (HWRoT) protects against malicious firmware.
MegaRAID Storage Administrator (MRSA), Storage Command Line Interface (StorCLI), Unified Extensible Firmware Interface (UEFI), and Redfish management.
Specs
Ports & interfaces
Supported storage drive interfaces
Serial ATA III
Host interface
Interface that enables a host controller to communicate with a driver.
PCI
PCI Express slots version
4.0
Performance
RAID levels
RAID is a storage technology that combines multiple disk drive components into a logical unit for the purposes of data redundancy and performance improvement. Data is distributed across the drives in one of several ways, referred to as RAID levels, depending on the specific level of redundancy and performance required.
60
Performance
Internal memory
The amount of memory, usually measured in bytes (e.g. MB, GB), which is installed in the system's hardware.
8192 MB
Certification
Refer to HPE Compute MR Controllers QuickSpecs
View AllClose
What is new supporting point:MR932i-p with PCIe Gen5 speeds (32 G NVMe and 24 G SAS) and does not support SATA SSDs nor SATA/SAS HDDs
Standard PCI HH/HL and OCP NIC 3.0 form factors.
DMTF Security Protection Data Model (SPDM) supports certificate-based authentication with HPE iLO 6.
Hardware Root of Trust (HWRoT) protects against malicious firmware.
MegaRAID Storage Administrator (MRSA), Storage Command Line Interface (StorCLI), Unified Extensible Firmware Interface (UEFI), and Redfish management.
Specs
Ports & interfaces
Supported storage drive interfaces
Serial ATA III
Host interface
Interface that enables a host controller to communicate with a driver.
PCI
PCI Express slots version
4.0
Performance
RAID levels
RAID is a storage technology that combines multiple disk drive components into a logical unit for the purposes of data redundancy and performance improvement. Data is distributed across the drives in one of several ways, referred to as RAID levels, depending on the specific level of redundancy and performance required.
60
Performance
Internal memory
The amount of memory, usually measured in bytes (e.g. MB, GB), which is installed in the system's hardware.
8192 MB
Certification
Refer to HPE Compute MR Controllers QuickSpecs
Additional Information
Shipping: |
Usually shipped within 3-5 working days |
Delivery: |
Usually delivered within 5-7 working days |