Lian Li
Lian Li LANCOOL 215WHITE Lancool-215 Midi Tower White LANCOOL 215WHITE
(No reviews yet)
Write a Review
- UPC:
- 0000000000000
- MPN:
- LANCOOL 215WHITE
- Condition:
- New
- Availability:
- Available to Order: 3 - 4 weeks leadtime
Description
Unobstructed Airflow
LANCOOL 215 features two pre-installed 200MM ARGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.
Equiped with two 200mm ARGB fan and one 120 fan at the rear. The mesh panel in the front creates a great airflow without bring the dust in. Include top and bottom honeycomb filtered vents, wide fan/radiator combination support, and multiple cable management solutions for the DIY users to fit their configuration.
LANCOOL 215 features two pre-installed 200MM RGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.
OPTIMIZED THERMAL MANAGEMENT
MESH INTAKES SPANNING THE FRONT PANEL GUARANTEE SUFFICIENT AIRFLOW IN AND OUT OF THE SYSTEM.
INCLUDED FANS
Pre-installed fans ensure the case runs at peak performance.
HONEYCOMB VENTS
The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.
MULTI COOLING SYSTEMS SUPPORT
Supports a maximum of 7 fans and radiators in various sizes and configurations. You make the call!
ULTIMATE COOLING SYSTEM SCENARIO
With two 200MM fans mounted outside of the frame,you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don�t worry about the fan screws, they won�t interfere with the radiator.
OPTIMIZED THERMAL MANAGEMENT
MOVE AIR STYLISHLY WITH ARGB EFFECTS
Two 200MM fans are equipped with LED lights which create a dazzling effect through the mesh panel.
EXPERIENCE ARGB CONTROL VIA ONE BUTTON
The LED button located on the top controls 8 lighting modes and 7 colors through a simple click.
HIGHLIGHTED LOGO
The LIAN LI logo glows in sync with the fans
ARGB SYNCHRONIZATION WITH THE MOTHERBOARD
Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights.
EFFORTLESS CABLE MANAGEMENT
PLENTY OF SPACE FOR CABLE MANAGEMENT
The 22MM thick space behind the motherboard ensures the cables fit in well.
PRE-INSTALLED FAN HUB
The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.
KEEP THE CABLE NICE AND NEAT
The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management.
STORAGE & MOTHERBOARD SUPPORT
ROOM FOR 4 STORAGE DRIVES
E-ATX MOTHERBOARD COMPATIBLE
Fits motherboards with a maximum width of 280MM.
SIMPLE DUST MANAGEMENT
The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top and the removable full-length dust tray at the bottom protect the internal components from dust accumulation without impeding the airflow.
Cooling
Front fans diameters supported
120, 140
Front fans installed
2x 200 mm
Front radiator sizes supported
280, 360
Number of front fans supported (max)
3
Number of top fans supported (max)
2
Rear fans diameters supported
120
Rear fans installed
1x 120 mm
Side fans installed
1x 120 mm
Top fans diameters supported
120, 140
Top radiator sizes supported
240, 280
Design
Anti-dust filter
Yes
Cable management
Yes
Form factor
Midi Tower
Illumination
Yes
Material
SGCC, Tempered glass
Maximum CPU cooler height
16.6 cm
Maximum graphics card length
37 cm
Maximum PSU length
21 cm
Number of 2.5" bays
2
Number of 3.5" bays
2
Number of expansion slots
7
On/off button
Yes
Product colour
White
Reset button
Yes
RGB control button
Yes
Side window
Yes
Suitable for
Gaming
Supported motherboard form factors
ATX, EATX, ITX, Mini-ATX
Tempered glass panel(s)
Yes
Type
PC
Package dimensions
Gross Weight (Package, kg)
6.5 kg
Ports & interfaces
Audio input
Y
Audio output
Y
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity
2
Product dimensions
Net Weight (Product, kg)
5 kg
Product Depth
46.2 cm
Product Height
48.2 cm
Product Width
21.5 cm
Storage
HDD/SSD combo cage
Yes
Number of HDDs supported
2
SSD form factor
2.5"
Supported HDD sizes
2.5, 3.5
Vendor information
Brand Name
Lian Li
Warranty
1 Year(s)
View AllClose
LANCOOL 215 features two pre-installed 200MM ARGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.
Equiped with two 200mm ARGB fan and one 120 fan at the rear. The mesh panel in the front creates a great airflow without bring the dust in. Include top and bottom honeycomb filtered vents, wide fan/radiator combination support, and multiple cable management solutions for the DIY users to fit their configuration.
LANCOOL 215 features two pre-installed 200MM RGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.
OPTIMIZED THERMAL MANAGEMENT
MESH INTAKES SPANNING THE FRONT PANEL GUARANTEE SUFFICIENT AIRFLOW IN AND OUT OF THE SYSTEM.
INCLUDED FANS
Pre-installed fans ensure the case runs at peak performance.
HONEYCOMB VENTS
The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.
MULTI COOLING SYSTEMS SUPPORT
Supports a maximum of 7 fans and radiators in various sizes and configurations. You make the call!
ULTIMATE COOLING SYSTEM SCENARIO
With two 200MM fans mounted outside of the frame,you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don�t worry about the fan screws, they won�t interfere with the radiator.
OPTIMIZED THERMAL MANAGEMENT
MOVE AIR STYLISHLY WITH ARGB EFFECTS
Two 200MM fans are equipped with LED lights which create a dazzling effect through the mesh panel.
EXPERIENCE ARGB CONTROL VIA ONE BUTTON
The LED button located on the top controls 8 lighting modes and 7 colors through a simple click.
HIGHLIGHTED LOGO
The LIAN LI logo glows in sync with the fans
ARGB SYNCHRONIZATION WITH THE MOTHERBOARD
Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights.
EFFORTLESS CABLE MANAGEMENT
PLENTY OF SPACE FOR CABLE MANAGEMENT
The 22MM thick space behind the motherboard ensures the cables fit in well.
PRE-INSTALLED FAN HUB
The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.
KEEP THE CABLE NICE AND NEAT
The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management.
STORAGE & MOTHERBOARD SUPPORT
ROOM FOR 4 STORAGE DRIVES
E-ATX MOTHERBOARD COMPATIBLE
Fits motherboards with a maximum width of 280MM.
SIMPLE DUST MANAGEMENT
The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top and the removable full-length dust tray at the bottom protect the internal components from dust accumulation without impeding the airflow.
Cooling
Front fans diameters supported
120, 140
Front fans installed
2x 200 mm
Front radiator sizes supported
280, 360
Number of front fans supported (max)
3
Number of top fans supported (max)
2
Rear fans diameters supported
120
Rear fans installed
1x 120 mm
Side fans installed
1x 120 mm
Top fans diameters supported
120, 140
Top radiator sizes supported
240, 280
Design
Anti-dust filter
Yes
Cable management
Yes
Form factor
Midi Tower
Illumination
Yes
Material
SGCC, Tempered glass
Maximum CPU cooler height
16.6 cm
Maximum graphics card length
37 cm
Maximum PSU length
21 cm
Number of 2.5" bays
2
Number of 3.5" bays
2
Number of expansion slots
7
On/off button
Yes
Product colour
White
Reset button
Yes
RGB control button
Yes
Side window
Yes
Suitable for
Gaming
Supported motherboard form factors
ATX, EATX, ITX, Mini-ATX
Tempered glass panel(s)
Yes
Type
PC
Package dimensions
Gross Weight (Package, kg)
6.5 kg
Ports & interfaces
Audio input
Y
Audio output
Y
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity
2
Product dimensions
Net Weight (Product, kg)
5 kg
Product Depth
46.2 cm
Product Height
48.2 cm
Product Width
21.5 cm
Storage
HDD/SSD combo cage
Yes
Number of HDDs supported
2
SSD form factor
2.5"
Supported HDD sizes
2.5, 3.5
Vendor information
Brand Name
Lian Li
Warranty
1 Year(s)