Origin Storage Inception TLC830 Pro Series 128GB M.2 NGFF 80mm SATA 3D TLC SSD OTLC1283DM.2/80

Origin Storage Inception TLC830 Pro Series 128GB M.2 (NGFF) 80mm SATA 3D TLC SSD

Origin Storage Inception TLC830 Pro Series 128GB M.2 (NGFF) 80mm SATA 3D TLC SSD. SSD capacity: 128 GB, SSD form factor: M.2, Read speed: 550 MB/s, Write speed: 500 MB/s, Data transfer rate: 6 Gbit/s, Component for: PC/Laptop

Features SSD capacity The Solid State Drive's data storage capacity. 128 GB SSD form factor The size of the solid-state drive, given in inches M.2 Interface Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2. Serial ATA III NVMe NVM Express (NVMe) or Non-Volatile Memory Host Controller Interface Specification (NVMHCIS) is an open logical device interface specification for accessing non-volatile storage media attached via a PCI Express (PCIe) bus. NVM Express, as a logical device interface, has been designed to capitalize on the low latency and internal parallelism of solid-state storage devices. Memory type Type of memory in the device e.g. DDR3, SRAM (Static RAM). 3D TLC Component for What this product is used as a part of (component for). PC/Laptop Hardware encryption Data transfer rate Rate at which data can be transferred. Usually expressed in units per second. May vary with network configurations. 6 Gbit/s Read speed The speed at which a device can read data. 550 MB/s Write speed The speed at which a device can write data. 500 MB/s Random read (4KB) 53760 IOPS Random write (4KB) 56320 IOPS Access time 0.2 ms Seek time Time necessary to find data on medium. 0 ms S.M.A.R.T. support ECC ECC means Error Correction Code, and it is memory that is able to detect and correct some memory errors without user intervention. Hot-swap Low-density parity-check (LDPC) Mean time between failures (MTBF) Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism. 1000000 h Windows operating systems supported Windows vesions wich can be used with the device. Linux operating systems supported 8 RT. Linux (9.4, 9.5), Red Hat Enterprise Linux 5.0 (supported with a pre-built package); SUSE Linux (10.3, 11.0, 11, 11.1, 11.2), Fedora (9, 9.0, 10, 10.0, 11.0, 11, 12, 12.0), Ubuntu (8.04, 8.04.1, 8.04.2, 8.10, 9.04, 9.10, 10.04), Debian (5.0, 5.0.1, 5.0.2, 5.0.3)