Solidigm D7-P5620 3.2 TB U.2 PCI Express 4.0 NVMe TLC 3D NAND SSDPF2KE032T1

Solidigm D7-P5620 3.2 TB U.2 PCI Express 4.0 NVMe TLC 3D NAND

Specs Features SSD capacity The Solid State Drive's data storage capacity. 3.2 TB SSD form factor The size of the solid-state drive, given in inches U.2 Interface Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2. PCI Express 4.0 NVMe NVM Express (NVMe) or Non-Volatile Memory Host Controller Interface Specification (NVMHCIS) is an open logical device interface specification for accessing non-volatile storage media attached via a PCI Express (PCIe) bus. NVM Express, as a logical device interface, has been designed to capitalize on the low latency and internal parallelism of solid-state storage devices. Memory type Type of memory in the device e.g. DDR3, SRAM (Static RAM). TLC 3D NAND Read speed The speed at which a device can read data. 6700 MB/s Write speed The speed at which a device can write data. 3600 MB/s Random read (4KB) 1000000 IOPS Random write (4KB) 341000 IOPS Random latency - read (up to) 75 -s Random latency - write (up to) 15 -s Sequential latency - read (up to) 10 -s Sequential latency - write (up to) 13 -s PCI Express interface data lanes x4 Features Uncorrectable Bit Error Rate (UBER) < 1 per 10^17 bits read Mean time between failures (MTBF) Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism. 2000000 h Use conditions Server/Enterprise Power Power consumption (idle) 5 W Weight & dimensions Weight Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies. 165 g Operational conditions Operating temperature (T-T) The minimum and maximum temperatures at which the product can be safely operated. 0 - 70 ?C Operating vibration Environmental requirements for vibration in operating mode 2.17 G Non-operating vibration Environmental requirements for vibration in non-operating mode 3.13 G Operating shock Environmental requirements for optimal protection from impact in operating mode 1000 G Non-operating shock Environmental requirements for optimal protection from impact in non-operating mode 1000 G Other features Power consumption (active) 15 W Logistics data Harmonized System (HS) code 84717070