StarTech.com 1:1 M.2 NVMe Drive Duplicator Standalone M.2 SSD Cloner/Copier up t M2-HDD-DUPLICATOR-N1

Clone M.2 NVMe drives without a host computer, or access the drives when connected to a computer via USB

This M.2 NVMe drive duplicator with a USB 3.2 Gen2x2 (20Gbps) host port offers high-speed duplication capabilities of up to 90GB per minute, providing efficient and fast cloning of storage devices.

High-Speed M.2 NVMe Duplication

Clone or duplicate M.2 NVMe solid-state drives (SSDs) without the need for a computer. This device requires no drivers or software and offers high-performance sector-by-sector duplication rates of up to 90GBpm and works with any file format, copying the entire drive.

NVMe Drive Access over USB 3.2 Gen2x2

The USB 20Gbps host connection enables external access and storage functionality for M.2 NVMe drives, facilitating data transfer between different computers without the need for internal drive installation.

Compact and User-Friendly

The device has a small form factor, requiring minimal desktop or storage space. LEDs display progress, status, and power, while an audible buzzer confirms duplication completion. The device features active and passive cooling to ensure optimal performance.

The top-loading (toaster-style) design accommodates all PCIe M.2 (M-Key) drives, including those with pre-installed heat sinks. The device supports 4Kn sector size. Please note that the target disk must be equal to or larger than the source disk.

The StarTech.com Advantage

Specs




Features


Product type

The sub-category of the product.

HDD/SSD duplicator


Product colour

The colour e.g. red, blue, green, black, white.

Black


Housing material

What the casing of the product is made of.

Plastic


Number of simultaneous copies

The amount of copies that can be made at the same time.

1 copies


Interface

Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.

USB 3.2 Gen 2 (3.1 Gen 2)


USB connector type

The type of USB connector/port that this product has.

USB Type-C


Duplicator operating modes

Copy


Transfer rate
000 MB/s


Transfer rate

90 GB/min


Hot-swap drive bays

The places where drives (hot-swap drives) can be inserted to or removed from the computer.




Plug and Play

Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.




Chipset

Set of electronic components in an integrated circuit that manages the data flow between the processor, memory and peripherals. It is usually found in the motherboard of a computer. Chipsets are usually designed to work with a specific family of microprocessors. Because it controls communications between the processor and external devices, the chipset plays a crucial role in determining system performance.

JMS586U


Number of fans

The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).

1 fan(s)


Fan diameter

The size of the fan, measured by the distance from one side of the fan to the other, via a straight line going through the middle of the fan.

6 cm


LED indicators




Hard drive


SSD support

Solid-state drive (SSD), a type of memory, can be used with this product.




SSD interface

The type of interface(s) with which the Solid State Drive is connected to other hardware.

M.2


Power


Power consumption (typical)

Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.

0.1 W


AC input voltage

The voltage of the AC electricity that is inputted into the product.
0 - 240 V


Input current

0.6 A


Output voltage
V


Output current

2 A



Power


Power plug type

Type M


Included power plug types

ANZ, EU, NA, UK


Weight & dimensions


Dimensions (WxDxH)

Dimensions of the product (Width x Depth x Height).

77 x 77 x 44 mm


Weight

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
9 g


Packaging data


Package width

The distance from one side of the packaging to the other.
0 mm


Package depth

The distance from the front to the back of the packaging.

90 mm


Package height

The distance from the top to the bottom of the packaging.

95 mm


Package weight

Weight of the packaged product.
0 g


Packaging content


Cables included

USB Type-A to USB Type-C, USB Type-C to USB Type-C


AC adapter included




Manual




Operational conditions


Operating relative humidity (H-H)
- 80%


Operating temperature (T-T)

The minimum and maximum temperatures at which the product can be safely operated.

5 - 55 -C


Storage temperature (T-T)

The minimum and maximum temperatures at which the product can be safely stored.

-20 - 55 -C


Sustainability


Sustainability compliance




Technical details


Compliance certificates

RoHS


Logistics data


Master (outer) case length

338 mm


Master (outer) case width

500 mm


Master (outer) case height

220 mm


Products per master (outer) case
pc(s)