Crestron HD-TX-4KZ-101-1G-B. Type: Av Transmitter Maximum Resolution: 4096 X 216 HD-TX-4KZ-101-1G-B

Crestron HD-TX-4KZ-101-1G-B. Type: AV transmitter, Maximum resolution: 4096 x 2160 pixels, Cable types supported: Cat5e. Current: 0.75 A. Width: 44 mm, Depth: 56 mm, Height: 105 mm The HD-TX-4KZ-101-1G is a DM Lite?� 4K60 4:4:4 wall plate transmitter designed to interoperate with a DM Lite?� receiver or DMPS Lite?�� switcher for the transmission of an HDMI?� signal. A CAT5e or higher twisted pair cable is used to connect the HD-TX-4KZ-101-1G to the DM Lite receiver or DMPS Lite switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.1 The HD-TX-4KZ-101-1G is available in two models: HD-TX-4KZ-101-1G-B (black) and HD-TX-4KZ-101-1G-W (white). Interoperability with a DM Lite Receiver or DMPS Lite Switcher The DM Lite output port of the HD-TX-4KZ-101-1G must be connected to a DM Lite input port of a DM Lite receiver or DMPS Lite switcher. Examples of supported DM Lite 4K60 4:4:4 receivers are theHD-RX-4KZ-101,HD-RXA-4KZ-101,HD-RXC-4KZ-101, andHD-RXCA-4KZ-101. Supported DMPS Lite switchers are theHD-PS621,HD-PS622,HD-PS401,HD-PS402, andHD-RX-4K-210-C-E(-POE). Note: When paired with an HD-RX-4K-210-C-E(-POE), the transmitter cannot provide power to the receiver. Power must be connected to the HD-RX-4K-210-C-E(-POE) only. The HD-TX-4KZ-101-1G can be configured and controlled only when it is used with a DMPS Lite switcher. The web interface of the switcher can be used to configure the HD-TX-4KZ-101-1G. In addition, control system programming and .AV Framework?�� software support of the HD-TX-4KZ-101-1G is hosted by the switcher. 4K60 4:4:4 and HDR Support The HD-TX-4KZ-101-1G supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision?� video formats are also supported.2 One-Gang Wall Plate Design The HD-TX-4KZ-101-1G is designed to mount into a 1-gang U.S. electrical box or plaster ring (not included). The HD-TX-4KZ-101-1G can receive power from the remote DM Lite receiver (surface mountable only) or DMPS Lite switcher.3 Interoperability with a DM Lite?� receiver or DMPS Lite?�� switcher Point-to-point extension of an HDMI?� signal over a CAT5e or higher cable DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals 4K60 4:4:4 capability HDR10, HDR10+, and Dolby Vision?� video formats Compliance with HDCP 2.3 CEC (Consumer Electronics Control) pass-through capability EDID pass-through capability One-gang wall plate design with black finish Decorator style faceplate required (FP-G Series sold separately) Power from the remote DM Lite receiver (surface mountable only) or DMPS Lite switcher
Media & Performance

Twisted Pair Cable StandardCategory 5e
Media Type SupportedTwisted Pair

Technical Information

Connectivity TechnologyWired
Maximum Operating Distance70.10 m

Interfaces/Ports

Number of Network (RJ-45) Ports1
Network (RJ-45)Yes
Number of HDMI Inputs1
HDMI InYes

Video

Graphics ModesUXGA
WQXGA
QWXGA
WUXGA
Full HD
2K
4K
4K UHD
Maximum Video Resolution4096 x 2160
Supported Video Modes1080i 80p


General Information

Product TypeVideo Extender Transmitter
Manufacturer Part NumberHD-TX-4KZ-101-1G-B
crestron
ManufacturerCrestron Electronics, Inc
Product ModelHD-TX-4KZ-101-1G-B
Product NameDM Lite 4K60 4:4:4 Transmitter for HDMI Signal Extension over CATx Cable, Wall Plate, Black
Product LineDM Lite
Brand NameCrestron

Physical Characteristics

Form FactorGang Box Mount
Wall Plate
Transmitter Height104.65 mm
Transmitter Width43.69 mm
Transmitter Depth55.63 mm
Transmitter Weight (Approximate)151.1 g
Product ColorBlack
Color FamilyBlack