Hpe Aruba Networking Ap-615-Rw Dual Radio Tri Band 2X2 Wi-Fi 6E Int Antennas Cam R7J49A

HPE Aruba Networking AP-615-RW Dual Radio Tri Band 2x2 Wi-Fi 6E Int Antennas Campus AP. 2.4 GHz, 5 GHz, 6 GHz, Maximum data transfer rate: 2400 Mbit/s. Security algorithms: WPA, WPA2, WPA3, WPA3-SAE. Ethernet LAN data rates: 100,1000,2500 Mbit/s. Power over Ethernet (PoE). Product colour: White For enterprises who need more wireless capacity and/or wider channels, Aruba 610 Series Campus APs are designed to take advantage of the newly available 6 GHz spectrum using a unique dual-radio/tri-band architecture. Adding support for the 6 GHz band to the traditional 2.4 GHz and 5 GHz bands more than doubles the available wireless capacity in a wireless network - so you can meet growing demand due to bandwidth-hungry video, increasing numbers of client and IoT devices, and growth in cloud. Unique to Aruba, the 610 Series features two radios that can be tuned to any two of the three available spectrum bands for Wi-Fi (2.4 GHz, 5 GHz, 6 GHz). This flexibility provides a cost-effective and compact platform that delivers full tri-band coverage as part of a multi-AP deployment and can be used with software that will intelligently and flexibly configure the radios of each of these dual-radio APs. More capacity and wider channels The Aruba 610 Series APs are designed to take advantage of Wi-Fi 6E and the 6 GHz band, which translates into far greater speeds, wider channels for multi-gigabit traffic, and less interference. Its two 2x2 MIMO radios deliver a combined peak data rate of up to 3.6 Gbps when configured for concurrent 5 GHz and 6 GHz operation. Advantages of 6 GHz Wi-Fi 6E provides up to 1200 MHz of additional unlicensed spectrum in the 6 GHz band for higher throughput and improved application performance. With up to seven 160 MHz channels, Wi-Fi 6E can better support low-latency, bandwidth hungry applications like high-definition video and augmented reality/virtual reality applications. Only Wi-Fi 6E capable devices can use the 6 GHz band so there is no interference or slowdowns due to legacy devices. Device class support The Aruba 610 Series APs are part of the low power indoor (LPI) device class. This fixed indoor-only class uses lower power levels and does not require an Automated Frequency Coordination service (AFC) to manage incumbent outdoor services, which is required for standard class APs. Global readiness While the need for more Wi-Fi capacity is recognized across the globe, countries are approaching the 6 GHz band differently. The 610 Series APs are set up to automatically update regulatory rules once Wi-Fi 6E regulations have been approved and certified. Extend the benefits of Wi-Fi 6 The Aruba 610 Series APs are based on the 802.11ax (Wi-Fi 6) standard, which means that all its efficiency and security enhancements are also available on the 6 GHz band. Wi-Fi 6 features such as Orthogonal Frequency Division Multiple Access (OFDMA), BSS coloring etc. are fully supported on the Aruba Wi-Fi 6E access points as well.
Power Description

Power Consumption5.60 W

Interfaces/Ports

Ethernet Technology2.5 Gigabit Ethernet
USBYes
Number of Network (RJ-45) Ports1
USB StandardUSB 2.0
Management PortYes
PoE PD PortYes

Technical Information

Network BandTri Band
Wireless Transmission Speed3.60 Gbit/s
Frequency Band5 GHz
2.40 GHz
6 GHz
Wireless LAN Standard802.11ax
Bluetooth StandardBluetooth 5
Encryption StandardWPA3-ENT
WPA
WPA2-MPSK
WPA2
WPA-ENT
WPA3
Data EncryptionYes
MIMO TechnologyYes
Beamforming TechnologyYes
Indoor/OutdoorIndoor


Physical Characteristics

Weight (Approximate)520 g
Form FactorCeiling Mountable
Height39 mm
Width160 mm
Depth160 mm
Antenna Form FactorInternal

General Information

Product TypeWireless Access Point
Manufacturer Part NumberR7J49A
hpe
Packaged Quantity1 / Each
ManufacturerHewlett Packard Enterprise
Product ModelAP-615
Product NameAP-615 Wireless Access Point
Product Series610
Brand NameHPE