APC Smart-UPS uninterruptible power supply UPS Line-Interactive 2.2 kVA 1980 W 9 SMX2200RMHV2U

Stay always online and prevent data loss
As soon as the power fails, an APC Smart-UPS immediately supplies emergency power to all connected equipment. Because an APC UPS does this automatically, you prevent unwanted failure of, for example, a PC, server or switch. With the included Powershute software, you can even have critical IT hardware shut down automatically and in a controlled manner. This prevents data loss, downtime and physical damage to hardware.

Extend the runtime
You can easily increase the number of minutes that the APC SMX UPS can independently supply emergency power by connecting external battery packs (SMX120RMBP2U). A runtime of several hours is even possible.

Safety
In addition, a Smart-UPS protects connected devices against peak voltage caused by lightning, among other things. This APC emergency power supply is ideally suited for (small) business use.

Network Management Card
If you connect the UPS directly to your network via the optional APC Network Management Card (AP9640/AP9641), it can be easily managed remotely via SNMP or our remote management software Ecostruxure IT Expert (SFTWES1-DIGI). You can also automatically send a shutdown signal via the network to multiple physical and/or virtual servers. By means of the APC PowerChute Network Shutdown Software belonging to the network card, it is even possible to differentiate the shutdown moment and the order in which this happens.

Easy to use
This APC Smart-UPS SMX is easy to operate thanks to the LCD screen.

Rack/tower convertible
The APC Smart-UPS SMX is rack/tower convertible. Because both the feet and the 4 post rack mounting brackets are included, you can mount it in a rack (2U) or place it upright.

Extend the lifespan
The internal battery cartridge (APCRBC117) can be replaced easily, safely and independently by the user. This without having to switch off the APC SMX2200RMHV2U or connected equipment. This way you can easily and cheaply extend the lifespan of the APC Smart-UPS and your equipment always stays online.

Warranty extension
The factory warranty of the SMX2200RMHV2U is 3 years, with the exception of the battery cartridge, which has a factory warranty of 2 years. Both are extended by 3 years to 6 and 5 years respectively with the APC service pack (WBEXTWAR3YR-SP-04).

Switched Outlet Groups: Remote reboot and phased start-up
Thanks to the Switched Outlet Groups it is possible to configure a phased/delayed power-on per UPS outlet group. This reduces the peak load on the UPS and brings it closer to the constant load, which can limit oversizing of the UPS.

It is also possible to reset a group of multiple UPS outputs and the equipment connected to them. If a network card (ap9640) is used in combination with Ecostruxure IT Expert (SFTWES1-DIGI), this can even be done remotely.

You can also switch off non-critical loads; this extends the runtime for critical equipment.

Included in the box
1x SMX2200RMHV2U
1x USB cable
2x C13 to C14 powercord 2 Meter
1x Schuko to C19 input powercord 2 Meter
1x C19 to C20 powercord 2.5 Meter
1x Software CD with Powershute Business Edition
1x Documentation CD
1x British BS1363A to C19 input powercord
2x 4 post rack mounting brackets
4x Stabilizer feet


This APC Smart-UPS is designed for IT managers or network administrators to maintain business uptime, data transfer and continuity during prolonged power outages. The 2200VA line interactive 2U rack/tower UPS provides pure sine wave power to support critical electronics during power disruptions. The SMX comes with IEC 320 C20 input (includes BS1363A, IEC 320 C20 and Schuko CEE 7/EU1-16P power cords), 8x IEC 320 C13 and 1x IEC 320 C19 outlets. The UPS has a SmartSlot for optional Network Management Card that enables graceful shutdown of physical servers, virtual machines & HCI Clusters via PowerChute Network Shutdown. Connect to 10 of the SMX120RMBP2U external battery packs to increase the amount of time the UPS can provide battery power to devices (battery packs sold separately). Use the intuitive LCD interface and PowerChute software to configure settings and monitor usage. This uninterrupted power supply can connect to EcoStruxure IT or third-party centralized management platforms. The SMX2200RMHV2U converts from a tower or stand-alone UPS to a rack mount UPS, offering flexibility in various installations. The SMX UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. This is compatible with dedicated user-replaceable battery, and the APC replacement battery cartridge helps restore UPS performance to the original specifications. The Smart-UPS comes with a pair of tower-mounting stabilizing feet and rack-mounting brackets. The 3 switchable outlet groups allow more granular management of the power supplied to your devices. The Emergency Power Off feature enables the UPS to remotely shutdown during emergencies.

Specs




Features


UPS topology

The two main UPS topologies are Double-Conversion True Online and Standby / Eco. Many quality-based considerations are involved when choosing the the optimal UPS for the job, like how they are coping with voltage disturbances.

Line-Interactive


Output power capacity

The maximum power that the device can produce.

2.2 kVA


Output power

The power that the device can produce.
80 W


Waveform

Sine


Input frequency

The frequency (Hz) which is required to power the product.

50/60 Hz


Output operation voltage (min)

The minumum voltage produced by the device during operation.
8 V


Output operation voltage (max)

The maximum output voltage produced by the device.

240 V


Output frequency regulation

50/60 Hz


Automatic Voltage Regulation (AVR)




Surge energy rating

A surge protector is an appliance designed to protect electrical devices from voltage spikes. A surge protector attempts to limit the voltage supplied to an electric device by either blocking or by shorting to ground any unwanted voltages above a safe threshold. The surge energy rating is a measure of how much energy a surge protector can theoretically absorb in a single event, without failure.

645 J


Response time

The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)

4 ms


Hold time (min)

2 ms


Hold time (max)
ms


Efficiency

98.1%


Emergency Power Off (EPO)




Noise level

The amplitude level of the undesired background noise, usually measured in decibels (db).

55 dB


Surge protection




Audible alarm(s)

Alarms that make a sound when they are activated (set off).




Auto-restart




Ports & interfaces


AC outlet types

The type of outlet for AC electricity.

C13 coupler, C19 coupler


Power plug

A power plug is a 2 or 3 pinned device that is placed into an electrical socket in order to make an electrical connection.

C20 coupler


AC outlets quantity

The number of sockets in the device where AC electrical power can be connected.

9 AC outlet(s)


Number of output IEC jumpers

2


USB port

The device features a socket into which a USB cable can be plugged.




SmartSlot




Battery


Battery technology

The type of battery in the device, e.g. nickel-cadmium (NiCd).

Sealed Lead Acid (VRLA)


Battery capacity

702 VAh


Typical backup time at full load

The amount of time that a backup energy source (e.g. UPS - Uninterruptible Power Source) can power the device for, when the backup energy source is fully loaded (100% of capacity).

9.8 min


Typical backup time at half load

The amount of time that a backup energy source (e.g. UPS - Uninterruptible Power Source) can power the device for, when the backup energy source is half-loaded (50% of capacity).

25.3 min


Battery life (max)

5 year(s)


Battery recharge time

Approximate time required to recharge the battery from completely empty to completely full

3 h


Hot-swap battery




Automatic battery test





Design


Form factor

The shape or design of the product.

Rackmount/Tower


Rack capacity

The spase that device fill in rack.

2U


Cable length

How long the cable is.

1.83 m


Product colour

The colour e.g. red, blue, green, black, white.

Black


LED indicators

Battery replacement


Operational conditions


Operating temperature (T-T)

The minimum and maximum temperatures at which the product can be safely operated.

0 - 40 -C


Storage temperature (T-T)

The minimum and maximum temperatures at which the product can be safely stored.

-15 - 45 -C


Operating relative humidity (H-H)

0 - 95%


Storage relative humidity (H-H)

0 - 95%


Operating altitude

0 - 3000 m


Non-operating altitude

0 - 15000 m


Certificates


Compliance certificates

RoHS


Certification

CE, CSA, EAC, EN/IEC 62040-1, EN/IEC 62040-2, FCC Part 15 Class A, IEC 60950, IRAM, RCM, UL 1778, VDE, REACH, PEP, EOLI


Packaging content


Rack mount kit




Cables included

RS-232, USB cable


Manual




Sustainability


Sustainability certificates

Green Premium


Weight & dimensions


Width

The measurement or extent of something from side to side.

432 mm


Depth

The distance from the front to the back of something.

667 mm


Height

The measurement of the product from head to foot or from base to top.

85 mm


Weight

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

37.3 kg


Packaging data


Software CD




Package width

The distance from one side of the packaging to the other.

596 mm


Package depth

The distance from the front to the back of the packaging.

869 mm


Package height

The distance from the top to the bottom of the packaging.

243 mm


Package weight

Weight of the packaged product.

45.4 kg


Logistics data


Products per pallet

Quantity of a single product per pallet. If more than one product is packed per carton; this is the number of products (not number of cartons) per shipping pallet.

8 pc(s)


Harmonized System (HS) code

85078000


Total carbon footprint (kg of CO2e)

The total mean carbon footprint value generated across various lifecycle stages (manufacturing, transportation / logistics, use and end of life) per unit (for one single product) i.e., measured in kilograms CO2e.

2715.94


Other features


Nominal output voltage

The voltage which the manufacturer states that the device can produce.

230 V


Nominal input voltage

The voltage which the manufacturer recommends that the device needs to operate normally.

230 V