Apc Smart-Ups X SMX1000I 1000Va 8X C13 Output Usb Expandable Runtime. Ups Topolo SMX1000I

APC Smart-UPS X SMX1000I - 1000VA, 8x C13 output, USB, expandable runtime. UPS topology: Line-Interactive, Output power capacity: 1 kVA, Output power: 800 W. AC outlet types: C13 coupler, Power plug: C14 coupler, AC outlets quantity: 8 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery capacity: 299 VAh, Typical backup time at full load: 8.1 min. Form factor: Rackmount/Tower, Product colour: Black, Rack capacity: 2U. Compliance certificates: RoHS, Certification: CE, EN/IEC 62040- Stay always online and prevent data loss As soon as the power fails, an APC Smart-UPS immediately supplies emergency power to all connected equipment. Because an APC UPS does this automatically, you prevent unwanted failure of, for example, a PC, server or switch. With the free APC PowerChute software, you can even have critical IT hardware shut down automatically and in a controlled manner when the UPS battery is almost empty. This prevents data loss, downtime and physical damage to hardware. Extend the runtime You can easily increase the number of minutes that the APC SMX UPS can independently supply emergency power by connecting external battery packs (SMX48RMBP2U). A runtime of several hours is even possible. Safety In addition, a Smart-UPS protects connected devices against peak voltage caused by lightning, among other things. This APC emergency power supply is ideally suited for (small) business use. Network Management Card If you connect the UPS directly to your network via the optional APC Network Management Card (AP9640/AP9641), it can be easily managed remotely via SNMP or our remote management software Ecostruxure IT Expert (SFTWES1-DIGI). You can also automatically send a shutdown signal via the network to multiple physical and/or virtual servers. By means of the APC PowerChute Network Shutdown Software belonging to the network card, it is even possible to differentiate between the shutdown moment and the order in which this happens. Easy to use This APC Smart-UPS SMX is easy to operate thanks to the LCD screen. Rack/tower convertible The APC Smart-UPS SMX is rack/tower convertible. Because both the feet and the front post rack brackets are included, you can mount it in a rack (2U) or place it upright. If you prefer to mount it on all four rack uprights, order the optional SU032A. Extend the lifespan The internal battery cartridge (APCRBC116) can be replaced easily, safely and independently by the user. This without having to switch off the APC SMX1000I or connected equipment. This allows you to easily and cheaply extend the lifespan of the APC Smart-UPS and your equipment will always remain online. Warranty extension The factory warranty of the SMX1000I is 3 years, with the exception of the battery cartridge, which has a factory warranty of 2 years. Both are extended by 3 years to 6 and 5 years respectively with the APC service pack (WBEXTWAR3YR-SP-02). Switched Outlet Groups: Remote reboot and phased start-up Thanks to the Switched Outlet Groups, it is possible to configure a phased/delayed power-on per UPS outlet group. This reduces the peak load on the UPS and brings it closer to the constant load, which can limit oversizing of the UPS. It is also possible to reset a group of multiple UPS outlets and the equipment connected to them. If a network card (ap9640) is used in combination with Ecostruxure IT Expert (SFTWES1-DIGI), this can even be done remotely. You can also switch off non-critical loads; this extends the runtime for critical equipment. This APC Smart-UPS is designed for IT managers or network administrators to maintain business uptime, data transfer and continuity during prolonged power outages. The 1000VA line interactive 2U rack/tower UPS provides pure sine wave power to support critical electronics during power disruptions. The SMX comes with IEC 320 C14 input, 8x IEC 320 C13 outlets, and 2x IEC jumper cables. The UPS has a SmartSlot for optional Network Management Card that enables graceful shutdown of physical servers, virtual machines & HCI Clusters via PowerChute Network Shutdown. It comes with IEC 320 C14 input, 8x IEC 320 C13 outlets, and 2x IEC jumper cables. The UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. This uninterrupted power supply can connect to EcoStruxure IT or third-par
Miscellaneous

Certifications & StandardsC-tick
CE
EN 50091-1
EN 50091-2
GOST
VDE
UL 1449


Interfaces/Ports

USBYes
Network (RJ-45)Yes

Battery Information

Battery ChemistryLead Acid
Backup/Run Time (Half Load)20 Minute
Backup/Run Time (Full Load)8 Minute
Battery CharacteristicsMaintenance-free, Sealed, Spill-proof

Power Description

Input Voltage220 V AC
Output Voltage230 V AC
Waveform TypeSine Wave
Load Capacity (VA)1 kVA
Load Capacity (Watt)800 W

Physical Characteristics

Weight (Approximate)22.90 kg
Form FactorRack-mountable
Rack Height2U
Height89 mm
Width432 mm
Depth490 mm
Product ColorBlack
Color FamilyBlack


Technical Information

Emergency Power OFFYes
Plug/Connector TypeIEC 60320 C14
Receptacle TypeIEC 60320 C13
Number of Battery & Surge Outlets10
Receptacle Detail8 x IEC 60320 C13

General Information

Product TypeLine-interactive UPS
Manufacturer Part NumberSMX1000I
schneider-electric
Packaged Quantity1 Each
ManufacturerSchneider Electric SA
Product ModelSMX1000I
Product NameSmart-UPS SMX1000I 1000 VA Tower/Rack Mountable UPS
Product LineSmart-UPS
Product SeriesSMX
Brand NameAPC by Schneider Electric